4G&5G Base HAT for RM500Q/SIM8200/GM800 module and Raspberry/Samsung ARTIK

Description

Product description: 4G&5G Base HAT for RM500Q/SIM8200/GM800 module and Raspberry/Samsung ARTIK /Rock64 Media computer board 1.Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+) 2.Supports the following brand M.2 5G Modules Quectel:RM500Q RM500U Gosuncn:GM800 Sierra:SIM8200 3.Compatible the following brand Boards 1.Raspberry Pi 4, 3, 2, B+ 2.Asus Tinker Board 3.Rock 64* 4.Samsung ARTIK’s board 5.Latte Panda 4.Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers 5.MANO SIM Card socket can easily reachable on the upside of the HAT. 6.Efficient and low quiescent current power circuit can hold up to 3Amps 7.Working temperature range: -40
Product description:
4G&5G Base HAT for RM500Q/SIM8200/GM800 module and Raspberry/Samsung ARTIK /Rock64 Media computer board
1.Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+)
2.Supports  the following brand M.2  5G Modules
Quectel:RM500Q   RM500U
Gosuncn:GM800
Sierra:SIM8200
3.Compatible the following brand Boards
1.Raspberry Pi 4, 3, 2, B+
2.Asus Tinker Board
3.Rock 64*
4.Samsung ARTIK’s  board
5.Latte Panda
4.Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
5.MANO SIM Card socket can easily reachable on the upside of the HAT.
6.Efficient and low quiescent current power circuit can hold up to 3Amps
7.Working temperature range: -40°C ~ 80°C
Note 1: The Base HAT doesn’t need driver. Rather The host computer(such as RPi, Asus Tinker Board) needs the driver of the compatible module that will be used with the Base HAT.  For example, if you are using Quectel’s EC25 with the Base HAT, then your host device should have the driver for Quectel EC25. Nowadays, most of the Linux kernel comes with the required drivers installed as a result the modules are recognized.
Note 2: These compatibility list created by assuming you’ve connected the Base HAT to the device via USB. UART communication can be work with every device in the list easily which have 3.3V level UART port.
Package Content:
1x 5G/4G<E Base HAT
1x USB 2.0 to TYPE C Cable
1x USB 3.0 to USB 3.0 Cable
1x Screw Driver
8x copper nut
8x M2.5 screw
1x quick installation Guide.