MS4120F1006 Honeywell Two Position Damper Actuator w/ Spring Return for Fire and

Description

Honeywell Two Position Damper Actuator w/ Spring Return for Fire and Smoke Applications (175 lb-in)
Part # MS4120F1006
MS4120, MS7520, MS8120 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.
Features
Brushless DC submotor with electronic stall protection for floating/modulating models.
Brush DC submotor with electronic stall protection for 2-position models.
Self-centering shaft adapter (shaft coupling) for wide range of shaft sizes.
Models available for use with two-position, single pole single throw (spst), line- (Series 40) or low- (Series 80) voltage controls.
Models available for use with floating or switched single-pole, double-throw (spdt) (Series 60) controls.
Models available for use with proportional current or voltage (Series 70) controls.
Models available with combined floating/modulating control in a single device.
Models available with adjustable zero and span.
Models available with line-voltage internal end switches.
Access cover to facilitate connectivity.
Metal housing with built-in mechanical end limits.
Spring return direction field-selectable.
Shaft position indicator and scale.
Manual winding capability with locking function.
UL (cUL) listed and CE compliant.
All Models are plenum-rated per UL873.
Specifications
Actuator Type: Damper
Application Type: Fire and Smoke
Fail Safe Mode: Spring Return
Control Signal: 2 position, SPST
Supply Voltage: 100 to 250 Vac
External Auxiliary Switches Available: Yes, SW2-US
Shaft Adapter Type: Self Centering clamping
Manual Operation: Manual Crank
Mounting: Direct Coupled
Frequency: 60 Hz, 50 Hz
Rotational Stroke: 95 ¬+/- 3 degrees
Rotational Stroke Adjustment: Mechanically limited 5 degree increments
Spring Return Direction: By orientation
Timing, Maximum Spring Return (sec): 20 sec
Timing, Nominal Driving @ 60 Hz (sec): 45 Sec
Dimensions (in.): 9.72 in high x 3.94 in wide x 2.95 in deep
Compatible Damper Shafts (in.): 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
Temperature Range, Ambient (F): -40 to 140 F
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing